VoIP
Residential > ATA(iAN-02EX)
Enterprise > SOHO / ENTERPRISE VoIP CPE
RESIDENTIAL VoIP CPE
ATA(iAN-02EX)
UTStarcom's iAN-02EX is a VoIP Analog Terminal Adaptor
(ATA) that enables the interconnection of legacy analog
phones/faxes to broadband networks. It is designed
for networks served by a variety of Call Agents and
UTStarcom's state of the art mSwitch Soft switch platform.
The iAN-02EX allows customers to realize next-generation,
standards-based Voice-over-IP (VoIP) communications
without replacing their existing phone equipment.
Designed for enterprise, small office and residential
applications, the iAN-02EX is a cost-effective solution
that dramatically extends analog equipment functionality,
thereby protecting customer investments. It has two
FXS voice ports, each supporting a separate, independent
phone number. Call control is provided via SIP (RFC
3261, 3262), MGCP, and H.323.
The Key Features are:
- Quality of Service (QoS) & superior
voice quality
- Outbound proxy/SIP Domain
- Enable/Disable Registrar
- Support most of the Supplementary
Call Features
- T.38 fax
- Dynamic codec negotiation (G.711U, G.711A,
G.729a, G.726, G.723)
- Voice Activity Detection (VAD),
Comfort Noise Generation (CNG)
- G.168 echo cancellation
- Advanced Routing, Gateway,
Configurable DHCP range for the LAN side of the ATA,
MAC cloning, NAT, NTP Server capability, Stun and
Firewall Capabilities
- Auto Configuration and Comprehensive
TFTP/HTTP based firmware upgrade philosophy
- Data Encryption
for configuration files
- Remote debugging through Telnet/CLI
and SNMP
- Universal power supply
- Regulatory compliance CE,
FCC part 15 Class B, UL certified
Customer Side |
Two RJ11 FXS Ports,
RJ45 Connector (10/100Base-T Ethernet, IEEE 802.3 |
Network Side |
RJ11 Life Line PSTN Connector / RJ45 WAN Port |
Downloads
SOHO / ENTERPRISE VoIP CPE
iAN-08E-Series VoIP (SIP/MGCP) IAD
UTStarcom’s iAN-08E Series VoIP Gateway enables the
interconnection of legacy analog phones with voice-enabled
broadband networks. Designed for networks served by
UTStarcom’s softswitch platform, mSwitch® and other
popular Call Agents, the iAN-08E™ Series essentially
allows customers to realize next-generation, standards-based
Voice-over-IP (VoIP) communications without replacing
their existing phone equipment.
UTStarcom iAN-08E Series Product is specially designed
for enterprises, regional offices, hotels, campuses,
and apartment buildings. The call control is provided
via Session Initiated Protocol (SIP) or Media Gateway
Control Protocol (MGCP).
UTStarcom iAN-08E Series Product portfolio is divided
in 3 variants namely, iAN-04E, iAN-08E8, iAN-08E16
/iAN-08E32 and use the same software platform. The
iAN-08E Series design offers a flexible, cost-effective
solution that dramatically extends analog equipment
functionality, thereby protecting customer investments.
iAN-04E provides 4 VoIP (SIP/MGCP) ports, 1 PSTN
Life line port. Extensive data services along with
advanced routing functions are also offered. |
 |
 |
iAN-08E8 provides 8 VoIP (SIP/MGCP) ports and
1 PSTN Life line port. Extensive data services
along with advanced routing functions are also
offered. |
|
 |
iAN-08E16/24/32 provides combinations of 16,24
or 32 FXS VoIP or PSTN ports. Extensive data services
along with advanced routing functions are also
offered. |
|
 |
The iAN-08E Series supports an extensive range of
VoIP and data features, which are listed below:
Voice Features:
Supplementary features: Call hold,
Call waiting, Call Transfer, 3 way call conference,
Call forward (always, busy, no answer), Speed Dial,
Polarity reversal, Distinctive rings, Fax, Caller ID,
Caller ID blocking (via RFC 3323 and 3325), Voice-mail
notification, internal phone book and Digitmap, configurable
hook-flash timing.
Data Features:
Advanced Routing, Gateway/Bridge mode
features, PPPoE Features, Static or Dynamic using DHCP
client, Configurable DHCP Free IP range for LAN interface,
Dynamic DNS, NAT and STUN.
Management and Provisioning:
Remote software upgrade
and configuration upload/download via TFTP, Telnet/Craft
CLI, EMS (Element Management System) based on SNMP
trap, Username and Password Authentication, Advanced
MGCP/SIP Authentication, and debug capability.
Downloads
|
